Particulate Filtering Facepiece Respirators
Particulate Filtering Facepiece Respirators
Particulate Filtering Facepiece Respirators (FFRs) are designed to reduce inhalation exposure to contaminants by filtering out airborne particles. Unlike face masks, FFRs are approved by the National Institute for Occupational Safety and Health (NIOSH) and have an Assigned Protection Factor (APF) of 10. They are equipped with two straps and must display appropriate NIOSH markings on the mask itself.
Particulate FFRs are made with a multi-layer, non-woven polypropylene material and are available with or without an exhalation valve. They come in a variety of shapes, including:
- Semi-hard, molded dome or cup
- Folded or flat-fold
- Pouch or duckbill, with an extended breathing chamber
Particulate FFRs are intended for one-time use. They are not washable and therefore do not have a long life cycle. Ideally, they should be discarded when they become damaged or deformed, wet or visibly dirty, contaminated with bodily fluids, or are no longer able to form an effective seal to the face.
While particulate FFRs are NIOSH tested and certified, NIOSH does not approve KN95, KF94, or any other respiratory products that may have international certifications. Regulatory compliance details for these devices are available at the individual product level.
All NIOSH-approved particulate FFRs are classified by a two-part system to indicate the filter’s functionality. Letter designations of N, R, and P refer to oil resistance. Number designations refer to the minimum filter efficiency level.
N-Series Filters – Not Resistant to Oil
- N95 – Filters at least 95% of airborne particles
- Surgical N95 – A NIOSH-approved N95 respirator cleared by the Food and Drug Administration (FDA) for use as a surgical mask
- N99 – Filters at least 99% of airborne particles
- N100 – Filters at least 99.97% of airborne particles
R-Series Filters – Resistant to Oil
- R95 – Filters at least 95% of airborne particles
P-Series Filters – Strongly Resistant to Oil
- P95 – Filters at least 95% of airborne particles
- P99 – Filters at least 99% of airborne particles
- P100 – Filters at least 99.97% of airborne particles
3M™ Aura™ Specialty Respirator, Series 9300
Lightweight and foldable. The 3M Aura Particulate Respirator uses a unique three-panel design for greater comfort and easy communication.
3M™ Aura™ Particulate Respirators 9300+ Series
Particulate respirators 9300+ Series feature an ergonomic, flat-fold, 3-panel design with a low breathing resistance filter media. Available in FFP1, FFP2 and FFP3 protection levels with valved and unvalved models, respirators have an innovative chin tab for easy adjustments and an embossed, sculpted upper panel to help reduce eyewear fogging.
Promotions are available
3M™ Particulate Respirator, FFP3, Valved, 8833SP
3M™ Particulate Respirator 8833 is a cup-shaped disposable respirator with a comfortable M-shaped nose clip, a soft waffle edge, and 3M™ Cool Flow™ Valve.
3M™ Disposable Particulate Respirator, 8000 Series
Ensures comfortable wear over a range of face sizes. The 3M 8000 Series Particulate Respirator has a convex shape.
3M™ Particulate Respirator, 8300 Series
Provide comfortable, effective respiratory protection against dust particles and/or non-volatile liquid particles. The 3M 8300 Series Particulate Respirator gives effective filtration with low breathing resistance for consistent high-quality performance.
3M™ Aura™ Particulate Respirator, 9300+ Gen3 Series
Aura™ Particulate Respirator 9300+Gen3 Series is the next generation of 3M Aura Respirator: FFP protection combined with the original 3-panel, flat-fold design.
3M™ Aura™ Particulate Respirators 9300+ Series
Particulate respirators have an ergonomic, flat-fold, 3-panel design featuring a low breathing resistance filter media. Available in FFP1, FFP2, and FFP3 protection levels with or without valves, Innovative chin tab for easy adjustments and an embossed, sculpted upper panel helps reduce eyewear fogging.
3M™ Particulate Respirators
To help improve fit to wearer’s individual face shape and size, particulate respirators are reusable and can be used for more than one shift.
3M™ Welding Fume Respirator
3M™ Welding Fume Respirators are designed for comfortable protection. Engineered to FFP2 standards with a flame-resistant, anti-clog surface and Electret™ filter, these cup-shaped filtering facepiece respirators have an adjustable nose clip and headband with a Cool Flow™ valve to remove exhaled air.
3M™ Particulate Respirator, Series C100
Provide comfortable, effective respiratory protection against dust and mist. The 3M C100 Series Particulate Respirator is lightweight and comfortable.
FFP2 Disposable Respirator Face Mask
FFP2 Disposable respirator to protect against inhalation of droplets and particles. Available with head band and without exhalation valve.
Promotions are available
Draeger™ X-plore™ 1710 V Face Mask
A new generation of particle filtering face masks, the X-plore™ 1710 V offers effective protection against fine dust, as well as solid and liquid particles.
Sperian™ Honeywell™ FFP2 NRD Disposable Respirators
Highly comfortable and ergonomically designed single-use respirators with no restriction with regard to use. Sperian™ Honeywell™ FFP2 NRD Respirators leverage the Willtech™ soft seal technology for an improved fit and exceptional comfort.
Euro Protection™ 3D Flat Fold Masks FFP3 NR D
Euro Protection™ 3D Flat Fold Masks FFP3 NR D are a single-use protective mask with a nasal clip and elastic for a secure, and comfortable fit.
Sperian™ Honeywell™ 4000 Premium Series Respirators
Reduces the risk of contamination and leakage, prevents irritation and allergies and increases safety. Sperian™ Honeywell™ 4000 Premium Series Respirators are easy to store and transport.