man

Test

Controlled Environments Lab Coats

Controlled Environments Lab Coats

Controlled environments lab coats, also known as cleanroom lab coats, are non-shedding garments specifically designed to be used in settings where strict contamination control is required including pharmaceuticals, electronics manufacturing, biotechnology, aerospace, and medical device manufacturing. They are made from materials such as polyester, SMS, or other synthetic blends that minimize the release of particles and fibers into the environment. Controlled environments lab coats are not intended to protect against chemicals, heat, or flames and should be selected based on the specific requirements of the work environment to ensure maximum protection. Regulatory compliance details can be obtained at the individual product level.
Product Type 
  • (34)
Size 
  • (4)
  • (3)
  • (5)
  • (7)
  • (6)
  • (6)
Color 
  • (29)
Material 
  • (7)
  • (5)
  • (4)
  • (11)
Closure Type 
  • (16)
  • (8)
Keyword Search: NOT insole Clear all selections

Filtered Search Results

Products from some of our suppliers do not display in filtered search results. Please clear all filters to see these products.

Narrow Results

Selected Filters

Clear all

Keyword Search

NOT insole

Narrow Results

Narrow Results

No results found within this category. Try removing some selected filters and try again.

category

brands

  • (1)
  • (6)
  • (8)
  • (6)
  • (5)
  • (8)

special offers

  • (8)

special programs

  • (12)
  • (2)

Product Type

  • (34)

Size

  • (4)
  • (3)
  • (5)
  • (7)
  • (6)
  • (6)

Color

  • (29)

Material

  • (7)
  • (5)
  • (4)
  • (11)

Closure Type

  • (16)
  • (8)

Disposable

  • (5)
  • (19)

Sterility

  • (12)
  • (11)

Cuff Style

  • (11)
  • (1)
  • (3)
  • (6)

Gender

  • (13)

No. of Pockets

  • (2)
  • (6)
  • (5)
1 – 9 of 9 results
1

Ansell AlphaTec™ 2000 STANDARD Lab Coat Bound

AlphaTec™ 2000 STANDARD Lab coat is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size.

EDGE
Resistance Fluids
Disposable Reusable
Certifications/Compliance (Europe) CE CATEGORY III (Type PB (6)-B, EN 14126)
Cuff Style Elastic
Product Type Controlled Environments Lab Coat
Color White
Model 2000
Style Knee-length
Material Microporous Non-woven Polyethylene Laminate
Gender Unisex
Autoclavable Not Autoclavable
Closure Type Zipper
2

Nitritex™ BioClean-D Disposable Laboratory Coats

Wear Nitritex™ BioClean-D Disposable Laboratory Coats to protect against laboratory contamination.

EDGE
Disposable Single-use
Construction Spunbond Polypropylene
Certifications/Compliance (Europe) (EU)2016/425, EN ISO 13034:2005+A1:2009, EN ISO 14325, EN 1149-5:2008, EN 530, EN 7854, EN 6530, EN 13934-1, EN 9073-4, EN 863, EN 13935-2
Cuff Style Open
Product Type Controlled Environments Lab Coat
Packaging Type One piece per sealed inner PE bag; one inner bag per sealed outer PE bag; 30 outer bags per lined carton (30 pieces)
Material Double Laminate Microporous Fabric
Certifications/Compliance ISO 9001:2015, ASTM F739-12
Sterility Non-sterile
No. of Pockets 3
3

Nitritex™ Laboratory Coat Single Use

The BioClean-D™ single use Lab Coat offers excellent comfort and protection. The product has been carefully developed, designed and constructed from antistatic CleanTough™ material which is particularly durable and low-linting. The garment features press stud fastenings, open cuffs, three pockets and a rear vent

4

DuPont™ Tyvek™ IsoClean™ Frock with Bound Neck

Delivers an ideal balance of protection, durability and comfort.

Seam Type Bound
Product Type Controlled Environments Lab Coat
Color White
Model IC270B0
Material Polyethylene
Closure Type Snaps
Sterility Non-sterile
5

DuPont™ Tyvek™ IsoClean™ Frock with Bound Neck
BIOPHARMA

Clean-processed to maximize cleanliness and pre-sterilized by gamma irradiation. DuPont™ Tyvek™ IsoClean™ Frock with Bound Neck provides an inherent barrier to particles, microorganisms and non-hazardous water-based light liquid splash. Breathable and exceptionally low linting.

Promotions are available
Disposable Single-use
Seam Type Bound internal seams
Cuff Style Tunnelized Elastic
Product Type Controlled Environments Lab Coat
Color White
Material Tyvek
Certifications/Compliance Clean-processed and sterilized by gamma-irradiation to SAL of 10-6 (ISO 11137-1), Full traceability on all sterilized apparel with certificates of sterility available, Suitable for use in GMP class A/B (ISO Class 5) clean rooms, PPE Category I
For Use With (Application) Cleanrooms within the biotech, pharmaceutical, medical device manufacturing, food processing, cosmetics industry as well as in other critical or controlled environments.
Closure Type Snaps
Collar Type Bound
Sterility Sterile
6

DuPont™ Tyvek™ IsoClean™ Gown

Protective gown with bound neck.

Product Type Controlled Environments Lab Coat
7

DuPont™ Tyvek™ IsoClean™ IC 270B WS Lab Coats, Sterile, Double Bagged
BIOPHARMA

Gamma-sterilized lab coats with bound neck are asepcially folded and feature bound internal seams, tunnelled at wrists, and a front snap closure.

Resistance Particulates,Light Liquid Splash
Disposable Single-use
Cuff Style Elastic
Product Type Controlled Environments Lab Coat
Color White
Latex Free Yes
Material Tyvek
Gender Unisex
Closure Type Snaps
Sterility Sterile
No. of Pockets None
8

Ansell AlphaTec™ 2000 STANDARD lab coat Bound

Superior lab coat with breathable microporous laminate technology.

9

Nitritex™ BioClean-D™ Non-Sterile Visitor Lab Coats

Lightweight and comfortable. Nitritex™ BioClean-D™ Non-Sterile Visitor Coat is a disposable coat manufactured from antistatic, low linting and durable CleanTough™ fabric and features a mandarin collar, press stud fastenings, elasticated cuffs and three pockets.

Disposable Single-use
Construction Single Needle Stitching
Packaging Type Five pieces per sealed inner PE bag; six inner bags per lined carton (30 pieces)
Color White
Material Double Laminate Microporous Fabric
Gender Unisex
Sterility Non-sterile
No. of Pockets 3
Resistance Puncture
Certifications/Compliance (Europe) (EU) 2016/425, EN 1149-5:2008, EN 530, EN 7854, EN 6530, EN 13934-1, EN 9073-4, EN 863, EN 13935-2
Seam Type Bound
Cuff Style Elastic
Product Type Controlled Environments Lab Coat
Certifications/Compliance ISO 9001:2015
Closure Type Zipper