Particulate Filtering Facepiece Respirators
Particulate Filtering Facepiece Respirators
Particulate Filtering Facepiece Respirators (FFRs) are designed to reduce inhalation exposure to contaminants by filtering out airborne particles. Unlike face masks, FFRs are approved by the National Institute for Occupational Safety and Health (NIOSH) and have an Assigned Protection Factor (APF) of 10. They are equipped with two straps and must display appropriate NIOSH markings on the mask itself.
Particulate FFRs are made with a multi-layer, non-woven polypropylene material and are available with or without an exhalation valve. They come in a variety of shapes, including:
- Semi-hard, molded dome or cup
- Folded or flat-fold
- Pouch or duckbill, with an extended breathing chamber
Particulate FFRs are intended for one-time use. They are not washable and therefore do not have a long life cycle. Ideally, they should be discarded when they become damaged or deformed, wet or visibly dirty, contaminated with bodily fluids, or are no longer able to form an effective seal to the face.
While particulate FFRs are NIOSH tested and certified, NIOSH does not approve KN95, KF94, or any other respiratory products that may have international certifications. Regulatory compliance details for these devices are available at the individual product level.
All NIOSH-approved particulate FFRs are classified by a two-part system to indicate the filter’s functionality. Letter designations of N, R, and P refer to oil resistance. Number designations refer to the minimum filter efficiency level.
N-Series Filters – Not Resistant to Oil
- N95 – Filters at least 95% of airborne particles
- Surgical N95 – A NIOSH-approved N95 respirator cleared by the Food and Drug Administration (FDA) for use as a surgical mask
- N99 – Filters at least 99% of airborne particles
- N100 – Filters at least 99.97% of airborne particles
R-Series Filters – Resistant to Oil
- R95 – Filters at least 95% of airborne particles
P-Series Filters – Strongly Resistant to Oil
- P95 – Filters at least 95% of airborne particles
- P99 – Filters at least 99% of airborne particles
- P100 – Filters at least 99.97% of airborne particles
3M™ Aura™ FFP1-FFP3 Particulate Respirators
3M™ Aura™ Particulate Respirator provides breathing protection with a flat-fold, 3-panel design, low breathing resistance and an embossed, sculpted top panel that can help reduce eyewear fogging.
Promotions are available
3M™ Aura™ Specialty Respirator, Series 9300
Lightweight and foldable. The 3M Aura Particulate Respirator uses a unique three-panel design for greater comfort and easy communication.
3M™ Aura™ 9300+ Series Particulate Respirator
3M™ Aura™ Particulate Respirators 9300+ Series has an ergonomic, flat-fold, 3-panel design featuring a low breathing resistance filter media. Available in FFP1, FFP2 and FFP3 protection levels, and with valved and unvalved models.
3M™ Aura™ Particulate Respirator, 9300+Gen3 Series
Aura™ Particulate Respirator 9300+Gen3 Series is the next generation of 3M Aura Respirator: FFP protection combined with the original 3-panel, flat-fold design.
Promotions are available
3M™ Disposable Particulate Respirator, 8000 Series
Ensures comfortable wear over a range of face sizes. The 3M 8000 Series Particulate Respirator has a convex shape.
3M™ Specialty Particulate Respirator 9922
3M™ Specialty Particulate Respirator 9922 provides lightweight FFP2 protection against dusts, mists, ozone, and gases.
3M™ Particulate Respirators
To help improve fit to wearer’s individual face shape and size. 3M™ Particulate Respirators are reusable and can be used for more than one shift.
3M™ Aura™ Particulate Respirator, Series 9400
Lightweight and foldable. The 3M Aura Particulate Respirator uses a unique three-panel design for greater comfort and easy communication.
FFP2 Disposable Respirator Face Mask
FFP2 Disposable respirator to protect against inhalation of droplets and particles. Available with head band and without exhalation valve.
Promotions are available
Kolmi™ Op Air Pro Oxygen FFP3 NR D Mass Balance Masks
Op Air Pro Oxygen FFP3 masks are easy to put on with high breathability due to high quality raw material. Made with the Mass Balance approach from recycled materials.
Draeger Safety X-Plore 1320 FFP2 NR D V Mask
Draeger Safety X-Plore 1320 FFP2 NR D V Mask is a disposable face mask for protection against solid and liquid particles (class 2).
Euro Protection™ 3D Flat Fold Masks FFP3 NR D
Euro Protection™ 3D Flat Fold Masks FFP3 NR D are a single-use protective mask with a nasal clip and elastic for a secure, and comfortable fit.
Sperian™ Honeywell™ 4000 Premium Series Respirators
Reduces the risk of contamination and leakage, prevents irritation and allergies and increases safety. Sperian™ Honeywell™ 4000 Premium Series Respirators are easy to store and transport.
Kolmi™ Op Air Pro Oxygen FFP2 NR D Mass Balance Mask
Op Air Pro Oxygen FFP2 mask is easy to put on with high breathability due to high quality raw material. Made with the Mass Balance approach from recycled materials.
Honeywell™ 5000 Series Specialty Disposable Respirators, FFP1-FFP2
5000 Series Specialty Disposable Respirators, FFP1-FFP2 are moulded half-masks designed specifically to deal with nuisance level organic vapors and acid vapors. Latex-, silicone-, and PVC-free, they offer superior odor removal, high moisture absorption, and excellent comfort. Dolomite tested.