Mechanical Sieves
Mechanical Sieves
Mesh device used to strain solids from liquids and manually separate particles by size; sieves can be constructed of metal or plastic. Products include sets, macro and micro sieve sizes, sifters and beads, etc.
What Is a Sieve?
Sieves are mesh strainers. They are typically round, with solid metal walls connected to a woven metal screen. They are often used with sieve receivers that collect the material that falls through the sieve. To prevent loss and contamination of the material, it can be protected by a sieve cover. Sieve covers are also necessary for covering the top sieve when multiple sieves are stacked on a laboratory shaker.
What Is Sieving?
Sieving is a technique for separating a sample into particles of different sizes. Sieving can be used to separate stones from sand and is used in the food industry to help eliminate contamination by foreign bodies.
Analysis by sieving may require a single sieve or a set of mesh sieves, arranged by decreasing size of the mesh openings. Air flow, liquid, vibration, or another mechanical method is used to move the sample particles through the screens.
Critical variables include sample size, agitation parameters, duration, and end point determination. Sample properties, like hygroscopic or electrostatic tendencies, can present analytical challenges, and some samples may need to be suspended in a liquid for accurate measurement.
Types of Sieves
Sieve frames and meshes may be stainless steel or brass. Common diameters are 3, 8, and 12 in. and 200 and 300mm; non-standard sieves may have other diameters, including 6, 10, and 18 in. Heights range from 1 to 9 in. and may be designated as full, intermediate, or half-height.
ASTM E-11 establishes criteria and tolerances for the openings in the woven wire mesh for standard sieve sizes. Some sieves are also traceable to NIST or must meet ISO 3310-1.
Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh
Made from Stainless Steel and available in a wide variesty of sizes. Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh has a 200mm diameter.
Fisherbrand™ Stainless Steel Receiver For Test Sieves
For the collection of materials processed through Fisherbrand™ Stainless Steel Test Sieves.
Fisherbrand™ Stainless Steel Test Sieves, 200 Dia. x 50 mm H, Pore sizes in Micrometers, ISO 3310/1
Use for separation, fractioning, or particle size determination. These Stainless Steel test sieves have an internal height of 50 mm and diameter of 200 mm. Available in a wide range of pore sizes smaller than 1mm.
Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh
Made from stainless steel and available in a wide variesty of sizes. Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh has an 100 mm diameter.
Fisherbrand™ Stainless Steel Lids For Test Sieve
Providing a secure closure to Fisherbrand™ Stainless Steel Test Sieves.
RETSCH Stainless Steel Collecting Pan for Test Sieves
Collects resulting samples from test sieves. These Stainless Steel pans are compatible with multiple test sieves and sieve shakers, based upon the required diameter.
Endecotts™ Woven Wire Mesh Sieve
Available in a variety of diameters and apertures
Biodesign™ Nylon Matrix Filter CellMicroSieves™
Allow the rapid, yet gentle, isolation of cells, organelles, or cellular debris.
Biodesign™ Polypropylene Sieve Holder
Autoclavable and can be repeatedly washed and reused
Endecotts™ Stainless Steel Test Sieve, 300mm dia.
Full height test sieves for all types of laboratory sampling and particle size analysis. Endecotts™ Stainless Steel Test Sieve, 300mm dia. comply with ISO 3310-1 / BS410 standards.
Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 50 mmH, Pore sizes greater than 10 mm, ISO 3310/1
Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 50 mm and diameter of 200 mm. Available in a wide range of pore sizes larger than 10 mm.
Cole Parmer™ Testing Sieve, Brass
Serialized sieve with a test sieve certificate of compliance.